Special Offers
Easy installation
The patented Econo-Kit installation kit includes: 1 x 8 mm drill bit, 4 x spacer plugs and 4 x mounting pins.
Use the holes provided in the lightweight polystyrene packing (400 Watt model only) OR the heater itself as a template to mark the position of the four holes on the wall (ensuring that the template is level) and then drill the holes using an 8mm masonry drill bit. For best results, Econo-Heat wall panel heaters should be mounted approximately 150mm (6 inches) above floor/skirting board and away from windows and doors.
Push the spacer-plugs into the wall and firmly push the Econo-Heat wall panel heater onto the four spacer-plugs.
Lock the heater into position with the mounting pins. (You can use a hammer to gently tap into place.)
-
-
TECHNICAL SPECIFICATIONS
Approx Quantities:
1 heater per 12m2 (temperate climate)
1 heater per 9m2 (cold climate)Rating: 1.8 Amps @ 230V - 50 Hz
Ohm Reading: 127
Dimensions: 600mm x 600mm x 10mm
Max Temp: Approx 75 - 90° C, depending on the ambient temperature
Mass: 6kg (Unpackaged)Cable:
Cable: 2m, 2 core
Plug: 2 point (World market: depending on country specifications)
-
-
TECHNICAL SPECIFICATIONS
Approx Quantities:
2 heaters per 12m2 (temperate climate)
2 heaters per 9m2 (cold climate)Rating: 1.2 Amps @ 230V - 50 Hz
Ohm Reading: 205
Dimensions: 600mm x 450mm x 10mm
Max Temp: Approx 75 - 90° C, depending on the ambient temperature
Mass: 4.1kg (Unpackaged)
Cable: 2m, 2 core
Plug: 2 point (World market: depending on country specifications)